Description
Bulk Fiberglass Range Hood Light Lens Material — 2-Pack, 5″ × 10-1/2″
This 2-pack of replacement range hood light lens panels measures 5″ × 10-1/2″ before cutting and replaces yellowed, cracked, or missing lens covers inside your range hood or over-the-range microwave light fixture. The opaque fiberglass sheet diffuses light from incandescent and LED bulbs, restoring even, glare-free illumination across the cooktop. Each panel is sold as raw stock — cut to your required size with household scissors or a utility knife, no special tools required.
Manufactured by American Metal Filter Company, this lens material matches the thickness and opacity specification of OEM range hood light lens panels. Both panels in this 2-pack are cut from the same sheet stock and can be trimmed to different sizes if your range hood has multiple light bays of varying dimensions.
Range Hood Filters Inc. is an independent manufacturer of aftermarket range hood filters and accessories. All OEM part numbers and brand names referenced on this page are used for compatibility identification only and do not imply affiliation with or endorsement by any original equipment manufacturer.
Key Benefits — RLFS0050-2 Bulk Fiberglass Light Lens Panels
- Cut-to-Fit Versatility: Each panel cuts cleanly with scissors or a scored utility knife line. Trim to your exact bay opening for a flush, professional fit in any slot-style or frame-retained light fixture.
- Restores Uniform Light Distribution: Opaque fiberglass diffuses the bulb point source and eliminates hot spots, so the cooktop is lit evenly from edge to edge without glare.
- 2-Pack Convenience: Replace both light bays simultaneously or install one panel and keep the second as a ready spare — no wait on a future reorder.
- Washable and Cleanable: Wipe grease film off the lens surface with a damp cloth and mild dish soap before it bakes on. Proper cleaning extends service life well past the 24-month replacement cycle.
- Replaces Yellowed or Broken Panels: Heat from incandescent bulbs and UV exposure cause fiberglass to yellow and embrittle over time. Fresh lens material restores the original clarity and light output of your range hood light bay.
- Made in the U.S.A.: Range Hood Filters Inc. has manufactured range hood filters and accessories in the United States since 1986 — over 40 years of filter manufacturing expertise.
RLFS0050-2 Light Lens Specifications
| Specification | Detail |
|---|---|
| Sheet Dimensions (each panel) | 5″ × 10-1/2″ |
| Material | Fiberglass |
| Color / Opacity | Opaque White |
| Pack Quantity | 2 panels per pack |
| Max Operating Temperature | 125 °F |
| Washable | Yes — mild soap and warm water |
| OEM Compatibility | N/A — cut-to-fit stock compatible with Rangaire range hood lens bays |
| Application | Range hood and over-the-range microwave light fixture lens replacement |
| Manufacturer | American Metal Filter Company |
How to Cut and Install Range Hood Light Lens Material
- Turn off the range hood and allow the light bulbs to cool fully before accessing the light fixture bay.
- Remove the existing lens panel by pressing the retaining tabs inward or sliding the frame out of the bay, depending on your range hood model. Note the position of any notches or cutouts.
- Measure the bay opening precisely — record the length and width to the nearest 1⁄16″. Measure twice before cutting.
- Mark and cut the new panel: Transfer the measurements to the lens sheet with a pencil. Cut along the line with sharp scissors for cuts up to 12″, or score multiple times with a utility knife against a metal straightedge for longer cuts, then snap cleanly along the score.
- Seat the cut panel into the light bay frame. Press it flat and reinstall any retaining clips or tabs to hold it in place.
- Restore power and test: The lens should sit flush with the bay opening and distribute light evenly across the cooktop with no raised edges or gaps.
Lens Care and Replacement Schedule
Wipe the lens panel monthly with a damp microfiber cloth to remove grease film. For heavier buildup, remove the panel and wash in warm soapy water, then rinse thoroughly and allow to dry completely before reinstalling. Replace the lens material every 24 months or when the panel becomes permanently yellowed, brittle, cracked, or no longer transmits even light distribution. Switching from incandescent to LED bulbs generates far less heat and UV, which can extend lens life considerably beyond the 24-month guideline.
Range Hood Light Lens — Frequently Asked Questions
Can I use this lens material in any range hood brand?
Yes. Because it ships as raw sheet stock rather than a pre-cut part, it can be trimmed to fit virtually any range hood model that uses a flat fiberglass panel in its light fixture bay — including Rangaire, Broan, NuTone, Rangaire, KitchenAire, Imperial, and many others. Confirm the raw sheet is large enough to yield your required cut size before ordering.
How do I cut fiberglass lens material?
Use a sharp pair of household scissors for cuts under approximately 12 inches. For longer, straighter cuts, score multiple times with a utility knife held against a metal straightedge and snap cleanly along the score. Always cut on a flat, stable surface for the most accurate result.
Will this material yellow over time?
All fiberglass range hood lens material gradually yellows with exposure to heat and UV from incandescent bulbs. Switching to LED bulbs generates significantly less heat and UV, extending lens life. Replace panels every 24 months or sooner if yellowing or brittleness becomes noticeable.
How many panels are included?
Each order contains 2 fiberglass lens panels, each measuring 5″ × 10-1/2″ prior to cutting. Use both to replace a two-bay range hood simultaneously, or install one and keep the other as a spare for the next replacement cycle.
